Page d'accueil

 

  Notre entreprise

 

  Équipements

  d'identification

   

   Machineries

  d'emballage

        

   Services à la

  clientèle

  

  Contactez nous!

 

  Demandes

  d'information

 

 

Emballeuses horizontales

 

***La version française sera disponible sous peu***

 

 

 

   
TECHNICAL SPECIFICATIONS
Machine speed
Up to 100 cpm, single jaw
Production output dependent upon product, film and machine specifications.
Product dimensions
length 50/450 mm - 2/17.7” with any jaw centres and length
width 20/230 mm - 0.8/9” with jaw length 250 mm - 9.8”
20/300 mm - 0.8/11.8” with jaw length 325 mm - 12.8”
height Up to 90 mm - 3.5” with jaw centre 150 mm - 5.9”
Up to 120 mm - 4.7” with jaw centre 180 mm - 7”
Film cut-off
From 100 up to 500 mm - 3.9/19.7”
Cut-off defined as: product length + height + 40 mm (1.6”), depending on product characteristics.
Wrapping materials
Suitable heat-sealable films, such as plain, or co-extruded polypropylene (PP), as well as laminate films (e.g. OPP+PE)
Film reel dimensions
core Ø 76 mm - 3”
outer Ø 350 mm - 13.8”
width Up to 650 mm - 25.6 ”
Film reel max weight
40 kg - 88 lbs
Power requirement
From 220 to 480 V, 50/60 Hz, 2-phase, 4 kVA
Compressed air
6 bar, 1 l/min with air gusseting
Machine weight
800 Kg - 1764 lbs

 

MAIN STANDARD FEATURES
  • Mechanical HFFS machine with rotary sealing jaws.
  • Single main AC motor (0,75 kW) with frequency inverter speed control.
  • Machine speed adjustable via potentiometer.
  • Two speed infeed, with manual gear change.
  • Fixed or adjustable folding box.
  • Two precision temperature controls with thermocouples, one for the sealing rollers and the other for the sealing jaws.
  • Machine stop with jaws in open position.
  • Adjustments by handwheels with “clock-face” setting pointers.
  • Single piece transparent guarding with safety interlock.
  • Sealing jaw disengage clutch.
  • Single film reel mounting, self-centering cones, right hand machine version, 2,5 m long infeed, standard.
  • Product infeed conveyor with adjustable side guides; interchangeable plastic pusher lugs, single pitch.
  • Hygienic design with cantilevered body and infeed, for easy clean down.
  • Robust mechanical construction with welded sheet metal main body, epoxy powder coating.
These specifications are not binding. We reserve the right to change them without prior notice.

 

 

 

MAIN STANDARD FEATURES

 

 
TECHICAL SPECIFICATIONS
Machine speed
From 25 up to 125 cpm, single jaw
Production output dependent upon product, film and machine specifications.
Product dimensions
length 50/450 mm - 2/17.7” with any jaw centres and length
width 20/230 mm - 0.8/9” with jaw length 250 mm - 9.8”
20/300 mm - 0.8/11.8” with jaw length 325 mm - 12.8”
height Up to 90 mm - 3.5” with jaw centre 150 mm - 5.9”
Up to 120 mm - 4.7” with jaw centre 180 mm - 7”
Film cut-off
Variable, ratio 1:5
Cut-off defined as: product length + height + 40 mm (1.6”), depending on product characteristics.
Wrapping materials
Suitable heat-sealable films, such as plain, or co-extruded polypropylene (PP), laminate films (e.g. OPP+PE), polythene films (PE) as well as cold-sealable films of suitable quality
Film reel dimensions
core Ø 76 mm - 3”
outer Ø 350 mm - 13.8”
width 650 mm - 25.6” standard
Film reel max weight
40 kg - 88 lbs
Power requirement
From 220 to 480 V, 50/60 Hz, 3-phase + N, 4 kVA
Compressed air
6 bar, 1 l/min with air gusseting
Machine weight
900 kg - 1984 lbs

 
  • Mechanical HFFS machine with rotary sealing jaws.
  • Single main AC motor (0,75 kW) with frequency inverter speed control; external electrical cabinet.
  • Machine speed adjustable via potentiometer.
  • Two speed infeed, with manual gear change.
  • Fixed folding box, standard.
  • Three precision temperature controls with thermocouples (1st one for sealing rollers, 2nd for upper jaw and 3rd for bottom jaw).
  • Machine stop with jaws in open position.
  • Adjustments by handwheels with “clock-face” setting pointers.
  • Single piece transparent guarding with safety interlock.
  • Sealing jaw disengage clutch.
  • Single film reel mounting with self-centering cones, right hand machine version, 2 m long infeed, standard.
  • Product infeed conveyor with adjustable side guides; interchangeable plastic pusher lugs, single and multiple pitch.
  • Hygienic design with cantilevered body and infeed, for easy clean down.
  • Robust mechanical construction with welded metal sheet main body, epoxy powder coating or (opt.) stainless-steel finishing.
  • Various types of automatic product feeders, available on request.
These specifications are not binding. We reserve the right to change them without prior notice.

 
 

MAIN STANDARD FEATURES

 
TECHNICAL SPECIFICATIONS
Machine speed
From 20 up to 140 cpm, single jaw
Production output dependent upon product, film and machine specifications.
Product dimensions
length 50/550 mm - 2/21.6” with any jaw centres and length
width 20/230 mm - 0.8/9” with jaw length 250 mm - 9.8”
20/360 mm - 0.8/14.2” with jaw length 400 mm - 15.7”
height Up to 90 mm - 3.5” with jaw centre 150 mm - 5.9”
Up to 120 mm - 4.7” with jaw centre 180 mm - 7”
Up to 140 mm - 5.5” with special m/c execution
Film cut-off
From 100 mm - 3.9“ up to 600 mm - 23.6”
Cut-off defined as: product length + height + 40 mm (1.6”), depending on product characteristics.
Wrapping materials
Suitable heat-sealable films, such as plain, or co-extruded polypropylene (PP), laminate films (e.g. OPP+PE), as well as cold-sealable films of suitable quality
Film reel dimensions
core Ø 76 mm - 3”
outer Ø 350 mm - 13.8”
width 650 mm - 25.6” standard; optional wider reel mounting, available
Film reel max weight
40 kg - 88 lbs
Power requirement
From 220 to 480 V, 50/60 Hz, 3-phase + N, 5 kVA
Compressed air
6 bar
Machine weight
1000 kg - 2200 lbs
 
  • Mechanical HFFS machine with rotary sealing jaws.
  • Single main AC motor (1,5 kW) with frequency inverter speed control; external electrical cabinet.
  • Machine speed adjustable via potentiometer.
  • Two speed infeed, with manual gear change.
  • Fixed folding box, standard.
  • Three precision temperature controls with thermocouples (1st one for sealing rollers, 2nd for upper jaw and 3rd for bottom jaw).
  • Machine stop with jaws in open position.
  • Adjustments by handwheels with “clock-face” setting pointers.
  • Single piece transparent guarding with safety interlock.
  • Sealing jaw disengage clutch.
  • Double film reel mounting, self-centering cones, right hand machine version, 3 m long infeed, standard.
  • Product infeed conveyor with adjustable side guides; interchangeable plastic pusher lugs, single and multiple pitch.
  • Hygienic design with cantilevered body and infeed, for easy clean down.
  • Robust mechanical construction with welded sheet metal main body, epoxy powder coating or (opt.) stainless-steel finishing.
  • Various types of automatic feeders, available on request.

These specifications are not binding. We reserve the right to change them without prior notice.

 
   
Plus d'information à propos d'Ilapak

Pour plus d'information sur ces équipements, veuillez contacter Nicolas Michel, représentant des ventes et du service, au 450-922-6622, ext. 170.